Missouri Whitetails - Your Missouri Hunting Resource banner
1 - 8 of 8 Posts

·
PURE KILLER
Joined
·
38,011 Posts
no i don't. but if you put it on let me know,i've been thinking real serius about about putting on the rocker panels of the truck:D
 

·
Registered
Joined
·
240 Posts
You shouldn't have a problem on doing a four wheeler. There will be instructions with it when you get it showing you how to do a raduis. All that you do is cut it into a pie slice and overlap each slice ontop of the other.You will need a razor blade and a squeege to apply it. Over the next two days keep squeeging any areas that show signs of coiming up. Also a pin to pop any bubbles then squeege the air out thru the hole made by the pin.

Make sure it is warm when you apply it or have a hair drier to help make it easier to work with.

I always use the permanent type although it still will come off in places. I just add some super glue where ever it starts to come up.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top